Singer Wide Hemmer Presser Foot Set
Choose options
Make 1/4" - 1" Wide Rolled Hems In One Step
Hemmer feet are very useful tools, but are rarely seen in useful sizes this large. The Singer Wide Hemmer Presser Foot Set includes seven hemmers that range from 1/4" to 1" in size. Simply pre-press the start of the hem, pressing under twice the width of the hem and feed it into the guide. The guide on the hemmer turns under the raw edge and allows it to be easily stitched into place, giving you professional looking turned hems on most fabrics. Includes instructions.
Watch our instructional video above to learn full details of what the Singer Wide Hemmer Foot Set can do and how to use it.
Snap on foot. IMPORTANT! Use the "COMPATIBILITY DETAILS" tab to know which feet fit your Singer model.
Singer Accessories
 |
 |
Singer has had so many models made by so many different manufacturers with all three major shank styles, it's impossible for there to be an accurate list of models to tell which model uses which feet, so you will need to check your machine yourself with these easy instructions.
If your Singer model has the wide 6mm snap on shank on the machine, you can use all the snap on presser feet in this category as well as the low shank presser feet which screw onto the machine, no shank needed. If you have a model with the older narrower snap on shank on your machine, you will need to purchase the new wider 6mm snap on shank here: S-5011-1.
Unless your machine has a slant needle and shank (when viewed from the left side of the machine) your machine is a low shank machine and uses all of the low shank screw on presser feet in this category.
- Singer SE9180 uses Viking presser feet
- Singer Featherweight C240 uses Pfaff presser feet
- We do not sell feet for the older Singer slant needle machines.
- The presser feet in this category DO NOT fit the following models: S16, S18, L-500, Quantum models: DSX II, CXL, LE, XL-1, XL-150, XL-100, XL-1000, XL-5000, XL-6000