Singer Open Toe Walking Foot With Seam Guide
Choose options
Also Known As An Even Feed Foot or Dual Feed Foot
The Singer Open Toe Walking Foot With Seam Guide is used for even feeding of fabric layers. A walking foot has a feed dog that grips the top layer of fabric to feed the top layer precisely as the machine feed dogs move the bottom layer, there´s no more shifting, great for quilting or matching stripes and plaids. The Singer Open Toe Walking Foot is also ideal for sewing napped and other difficult to sew fabrics that tend to creep, slip or stretch while you are sewing; a straight stitch is generally used, though other utility stitch patterns and some simple decorative stitches can also be used as necessary. The Singer Open Toe Walking Foot also features an open toe sole for better visibility. Red markings indicate center needle position for stitching in the ditch and markings to sew 1/4" and 1/8" seams and for pivoting.
The Singer Open Toe Walking Foot With Seam Guide also includes an adjustable edge guide so that you can easily stitch a chosen distance from the edge of a fabric or from a previously sewn row of stitching. Great for linear quilting and deep hems on draperies, etc. Includes instructions.
Be sure to check out our video above on how to use a walking foot!
Low shank foot. IMPORTANT! Use the "COMPATIBILITY DETAILS" tab above to know which feet fit your Singer model.
Singer Accessories
 |
 |
Singer has had so many models made by so many different manufacturers with all three major shank styles, it's impossible for there to be an accurate list of models to tell which model uses which feet, so you will need to check your machine yourself with these easy instructions.
If your Singer model has the wide 6mm snap on shank on the machine, you can use all the snap on presser feet in this category as well as the low shank presser feet which screw onto the machine, no shank needed. If you have a model with the older narrower snap on shank on your machine, you will need to purchase the new wider 6mm snap on shank here: S-5011-1.
Unless your machine has a slant needle and shank (when viewed from the left side of the machine) your machine is a low shank machine and uses all of the low shank screw on presser feet in this category.
- Singer SE9180 uses Viking presser feet
- Singer Featherweight C240 uses Pfaff presser feet
- We do not sell feet for the older Singer slant needle machines.
- The presser feet in this category DO NOT fit the following models: S16, S18, L-500, Quantum models: DSX II, CXL, LE, XL-1, XL-150, XL-100, XL-1000, XL-5000, XL-6000