Singer Side Cutter/Serger Attachment
Choose options
Cuts Excess Fabric While You Sew and Overlock the Seam In One Pass
With the Singer Side Cutter attachment, you can quickly and professionally finish seam edges without the need for a serger. Just snap on the Side Cutter, select an overlock or zig zag stitch appropriate for your fabric and sew. The Singer Side Cutter will effortlessly trim excess raveling threads and seam allowances, leaving you with a professional edge finish on any fabric. Includes directions.
Snap on foot. IMPORTANT! Use the "COMPATIBILITY DETAILS" tab to know which feet fit your Singer model.
Singer Accessories
 |
 |
Singer has had so many models made by so many different manufacturers with all three major shank styles, it's impossible for there to be an accurate list of models to tell which model uses which feet, so you will need to check your machine yourself with these easy instructions.
If your Singer model has the wide 6mm snap on shank on the machine, you can use all the snap on presser feet in this category as well as the low shank presser feet which screw onto the machine, no shank needed. If you have a model with the older narrower snap on shank on your machine, you will need to purchase the new wider 6mm snap on shank here: S-5011-1.
Unless your machine has a slant needle and shank (when viewed from the left side of the machine) your machine is a low shank machine and uses all of the low shank screw on presser feet in this category.
- Singer SE9180 uses Viking presser feet
- Singer Featherweight C240 uses Pfaff presser feet
- We do not sell feet for the older Singer slant needle machines.
- The presser feet in this category DO NOT fit the following models: S16, S18, L-500, Quantum models: DSX II, CXL, LE, XL-1, XL-150, XL-100, XL-1000, XL-5000, XL-6000