Singer Edge Guide
Choose options
Sew Even Seam Allowances, Wide Hems & More
The Singer Edge Guide is a versatile tool to use with many different presser feet for various techniques. The Singer Edge Guide slips into the accessory hole in the back of the presser foot shank. Fits all Singer models. Includes instructions.
Use for:
- topstitching
- tucks
- hems
- channel quilting
- more accurate seam allowances for beginners
- a guide to follow unusual seam allowance widths or distances greater than marked on your needle plate
- can be set to a maximum distance of approximately 2 3/4" from the needle
Singer Accessories
 |
 |
Singer has had so many models made by so many different manufacturers with all three major shank styles, it's impossible for there to be an accurate list of models to tell which model uses which feet, so you will need to check your machine yourself with these easy instructions.
If your Singer model has the wide 6mm snap on shank on the machine, you can use all the snap on presser feet in this category as well as the low shank presser feet which screw onto the machine, no shank needed. If you have a model with the older narrower snap on shank on your machine, you will need to purchase the new wider 6mm snap on shank here: S-5011-1.
Unless your machine has a slant needle and shank (when viewed from the left side of the machine) your machine is a low shank machine and uses all of the low shank screw on presser feet in this category.
- Singer SE9180 uses Viking presser feet
- Singer Featherweight C240 uses Pfaff presser feet
- We do not sell feet for the older Singer slant needle machines.
- The presser feet in this category DO NOT fit the following models: S16, S18, L-500, Quantum models: DSX II, CXL, LE, XL-1, XL-150, XL-100, XL-1000, XL-5000, XL-6000