Janome Edge Guide
Choose options
Sew Even Seam Allowances, Wide Hems & More
The Janome Edge Guide is a versatile tool to use with many different presser feet for various techniques. The Janome Edge Guide slips into the accessory hole in the back of the presser foot shank. Fits all Janome models. Includes instructions.
Use for:
- topstitching
- tucks
- hems
- channel quilting
- more accurate seam allowances for beginners
- a guide to follow unusual seam allowance widths or distances greater than marked on your needle plate
- can be set to a maximum distance of approximately 2 3/4" from the needle
Janome / Elna / Kenmore Accessories
Feet in this category are for all Janome (New Home) brand and Janome made top-loading drop in bobbin machines including:
- Late Elna models
- Late Kenmore models
- Bernette B37 & B38
- Baby Lock Molly, Anna, Joy & Zeal
- Pfaff Hobby 1142, 1132, 1122
- Juki HZL-LB5100 and HZL-LB5020
HOW TO DETERMINE YOUR SHANK HEIGHT
Janome has made so many machines, even they do not have a comprehensive list of each model. Fortunately, it’s easy to tell which feet fit your machine.
- Check your shank height using the photo above as a guide
- Know your machine's stitch width, either 7mm or 9mm
- Each snap on presser foot will indicate whether it is a 7mm stitch width foot or a 9mm stitch width foot.
- Screw on feet are available in either low shank or high shank.
--All Janome, Elna & Kenmore machines with a front-loading, removable, vertical bobbin case, your machine uses feet from our Generic category.
--Swiss made Elna machines, you will need presser feet from our Generic category.
--Older Kenmore super high shank machines, we do not have feet available for these machines.